Kyocera KM-C2525E Advanced Operation Manual page 177

Basic - Black and White Mode
The setting items are as follows.
Setting Item Value
Orig. image Photo, Text, Text+Photo, OCR
quality
File Type TIFF, PDF
Basic - Color/Monochrome (Gray) Mode
The setting items are as follows.
Setting Item Value
Density -3 – +3
Adjustment (Auto)
Density -3 – +3
Adjustment
(Manual)
File Type JPEG, PDF, TIFF, High Compression
PDF
PDF/TIFF/JPEG 1 (Low), 2, 3 (Standard), 4, 5 (High) Specify PDF, TIFF and JPEG quality.
Quality
High Compression 1 (Compression Ratio Priority), 2,
PDF Quality 3 (Quality Priority)
Output Color Type RGB, sRGB
Basic - Universal mode
The setting items are as follows.
Setting Item Value
Resolution 600dpi, 400dpi, 300dpi, 200dpi
Multiple scanning On, Off
File Name Enter the filename using less than 16
characters.
Setting Scanner from a Web Browser
Description
Select from the following four modes
depending on the type of original being
scanned.
Specify the file type when saving a
scanned image.
Description
When density adjustment is set to
Auto, adjusts the overall dark/light
balance.
When density adjustment is set to
Manual, adjusts the overall dark/light
balance.
Specify the file type when saving a
scanned image.
Sets high compression PDF quality.
Configure the color output type.
Description
Select from the following four
resolutions to scan an original.
Select whether to scan originals in a
continuous operation.
Specify the name used when saving
scanned images.
5-11