Kyocera KM-C2525E Advanced Operation Manual page 213

Basic - Color/Monochrome (Gray) mode
The setting items are as follows.
Setting Item Value
File Type JPEG, TIFF, PDF, PDF (High
Complex)
JPEG quality 1 (Low), 2, 3 (Standard), 4, 5 (High) Set the JPEG quality.
High Compression 1 (Low size), 2 (normal), 3 (High
PDF quality quality)
Output Color Type RGB, sRGB
Density -3 - +3
Adjustment (Auto)
Density -3 - +3
Adjustment
(Manual)
Basic - Universal mode
The setting items are as follows.
Setting Item Value
Resolution 600dpi, 400dpi, 300dpi, 200dpi
Multiple Scanning OFF, ON
File Name Enter the filename using less than 16
characters.
Extension
The setting items are as follows.
Setting Item Value
Full scan –
Centering ON, OFF
Uncompress –
scanning
Continuous ON, OFF
sending
File name Input Manual, Auto/Manual
Included Scanner Utilities
Description
Specify the file type when saving a
scanned image.
Sets high compression PDF quality.
Configure the color output type.
When density adjustment is set to
Auto, adjusts the overall dark/light
balance.
When density adjustment is set to
Manual, adjusts the overall dark/light
balance.
Description
Select from the following four
resolutions to scan an original.
Select whether to scan originals in a
continuous operation.
Specify the name used when saving
scanned images.
Description
Does not function on this scanner.
When scanning with zoom, by
specifying the Original size and the
Send size, blank borders around the
bottom or left and right will be shown
depending on the sizes. When setting
Auto Center, the image is moved to the
center so that blank borders around
the top and bottom or left and right
become even.
Does not function on this scanner.
Use the same settings from a
previously completed transmission for
the next transmission. The scan
function screen is returned with the
sender (user), destination and other
settings remaining from the previous
operation.
Displays the filename input box
without displaying the auto/manual
selection screen.
6-21