Hard Disk Management - Kyocera KM-C2525E Advanced Operation Manual

System Menu

Hard Disk Management

Verify available hard disk space and delete invalid data from the Hard Disk Management screen.
Perform the following steps.
1 Press the System Menu/Counter key.
2 Press [BOX Management] ([Hard Disk
Management]).
3 Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the
25/25 ppm model, 3200 for the 32/25 and 32/32 ppm models and 4000 for the 40/35 ppm model.
If the correct code has been entered, the HDD management mode (HDD management) screen will
be displayed.
NOTE: For security, it is recommended to change the management code. For further details, refer
to Changing Management Code on page 7-25.
If the optional security kit has been installed, the management code is 8 digits long. The default
setting is 25002500 for the 25/25 ppm model, 32003200 for the 32/25 and 32/32 ppm models and
40004000 for the 40/35 ppm model.
4 To verify available hard disk space or total capacity, press [On] below Check Hard Disk Capacity (on
the left side of the screen).
To delete invalid data, press [On] below Delete invalid data (on the right side of the screen).
NOTE: When the optional security kit is installed, Format Hard Disk is displayed. For further details,
refer to the optional security kit Operation Guide.
5 Press [Close].
6 Press [Close]. The display is returned to the System Menu screen.
7-42
m Menu / Counter
Language
Printer MP tray
Default Setting
Document Register
Management Orig. Size
End
Job
Accounting
BOX Check the
Management counter
Print User
Report Adjustment