Programmed Scanning - Kyocera KM-C2525E Advanced Operation Manual

Scanner Settings

Programmed Scanning

Up to 5 different combinations of destination, sending mode and functions can be registered for
programmed scanning. After registering sets of frequently used destinations and modes as a single
program, simply press the program number to recall those settings. You can also name the
programs to identify them.
NOTE: When registering programmed scanning, up to 20 destinations can be specified for
simultaneous transmission.
Registering Programs
Follow the steps as below to register a program.
1 Set the desired destination and sending
mode (example: Group A, Scan to PC,
PDF file, etc. and press [Register
Prgrm].
2 Press [Register].
3 Press the number (1 to 5) of the program
to register.
4 Enter the program name and press
[End].
NOTE: Refer to Character Input
Method on page 7-47 for how to enter
text characters.
5 Press [Yes]. The program is registered.
4-20
Ready to scan.
Place the original and select destination.
Scan to PC-Sending
Destination
Group A
Save at Address
User PC Book
Select item.
Registering Programs Menu
Register
Delete
Change
Name
Register present setting
Select program number.
No registration
No registration
No registration
No registration
No registration
play
Char.Limit:16 letters including #
AllDel.
Letter Num./Sym.
( Full-Color ) Original
11×8½"
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size 200dpi
Delete
Select Scanning
Send Size Resolution
Basic
Quality
Stop
Del. prev
Space
08/0
08/0
End