Kyocera KM-C2525E Advanced Operation Manual page 43

3 Press [Booklet].
4 Select binding orientation for Original and Finished.
If the message Cannot copy with these settings. Modify settings according to the original and
finishing is displayed, verify that you are selecting the correct original orientation (shown at the right
of the touch panel) and the correct settings for the original and finished copies.
5 If the optional 3000 sheet document finisher and folding unit are installed, [Saddle stitch] ([Centre
Staple]) is displayed. To set bind&fold, press [Saddle stitch] ([Centre Staple]).
Press [Bind & Fold] and press [Close].
Up to 16 sheets (64 pages) can be
processed with bind&fold.
6 To insert a cover page, press [Stitching Front Cvr] ([Stitching Front cov.]).
Press [On] and press [Close].
Place the original and press the Start key.
7
NOTE: When using the platen, be sure to place the originals in page order.
If the original has been placed on the optional document processor, copying begins automatically.
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and
press the Start key.
If all original pages have been scanned, press [Scanning finished]. Copying begins.
2 sided mode. (
Booklet
Original Finished
Open from
Off 1 sided
left
2-sided Open from
Booklet
Left/Right right
Book 2-sided Open from
Booklet Top/Bottom top
2 sided mode. (
Saddle Stitch
No cover
Bind &
Fold
2 sided mode. (
Stitching Front Cvr
Off
On
Copy Functions
Paper Size
Full-Color )
100%
Shortcut Back
Stitching
Select Original I
Direction.
Off
Stitching
Front cvr
Off
Saddle
Top Edge
Stitch
Paper Size
Full-Color )
Back
Full-Color ) Paper Size
Back
Automatically adds covers in book
binding mode using paper (color o
thick) fed from a different cassette
Load the paper for covers in the
specified cassette.
11×1
11×1
100%
11×1
100%
1-27