Kyocera KM-C2525E Advanced Operation Manual page 184

Setting Scanner from a Web Browser
Setting Item
Save Number
Registration Button
Reset Button
Delete Button
Add Destination (PC) Group Registration
Add or edit the destination (PC) group.
IMPORTANT: Destination Registration (PC) Group Registration cannot be performed until after
Destination (PC) Single Registration has been performed.
Select the destination to add to the group and click the checkbox next to the No. Enter the group
registration name and password details and click the Registration button to add the destination
group.
Setting Item
Registration Name
Registration Number
Change Group Password Field to enter the group password. Set to Yes to change the password
New Password
Confirm New Password
5-18
Description
To select multiple save destinations on a single computer, enter the
save number. Up to 100 save destinations (folders) can be specified
for a single computer. (Use save numbers between 1 - 100)
Click the Registration button to save the settings to the scanner.
Entered data is lost if this button is not clicked.
Click the Reset button to reset any changes to the setting options.
Click the Delete button to delete the displayed destination.
Description
Field to enter the Registration Name. When a name is entered here, it
is shown in the Destination PC Registration table and on the scanner
device operation panel. Enter a registration name less than 16
characters long.
The number selected from the Destination List is shown here. This is
shown for to verify which number from the Destination Registration
Table is being added or modified, and cannot be modified itself.
or No to leave unchanged.
To change the password, enter the new password here using less than
8 digits (numbers).
For verification, re-enter the same password as in the New Password
field above.