Using The Output Management Functions; Prt Status] Screen - Kyocera KM-C2525E Advanced Operation Manual

Document and Output Management Functions

Using the Output Management Functions

Manage jobs using the [Prt Status] ([Prnt Status]) screen for output management function.
Press the Output Management key. [Prt Status] ([Prnt Status]) screen is displayed.

[Prt Status] Screen

Displays information about current printing status and queued jobs.
1
2
3
4
5
6
7
8
2-12
Print Management
Job
1
Move
2
Ahead
Prt Status
Job List – Shows job information. The job currently in progress is listed on top, with
subsequent jobs listed below in the order they will be finished. Job items are indicated by
print jobs by , and fax jobs by
[Move Ahead] ([Move up]) – Increases the print priority of the selected job. (Copy jobs may
not be moved to a higher priority than print jobs or fax jobs.)
[Move Behind] ([Move down]) – Decreases the print priority of the selected job.
[Interrupt Print] – Cancels the current print operation and begins printing the selected job. The
job is moved to the top of the list.
[Cancel/Delete] – Deletes the selected copy job.
[Document Properties] ([Check/Rev. Details]) – Displays the Check/Correct Details
(Check/Revise Details) screen. From this screen, you can check the content of the selected
job, change the print quantity, and other details.
[ ]/[ ] – Use to select the desired job.
[End] – Close the Output Management Function. Pressing this key displays the [Basic] screen
or shows the current progress.
Input Source Original Set
Copy
Copy
Move Interrupt Cancel/
Behind Print Delete
3 4
.
End
Registration State
Printing
Waiting
Document
Properties
5 6
8
7
,