System Basic Setting - Kyocera KM-C2525E Advanced Operation Manual

System Setting
Configure the scanner's basic settings.

System Basic Setting

Set the scanner's network settings such as the IP address.
Network 1 Tab
Item
Network 1/Network
2/IP-Filters Tab
Host Name
IP Address
Subnet Mask
Default Gateway
DHCP/BOOTP
RARP
ARP/PING
DNS Server
(Pri.)
DNS Server
(Sec.)
DNS Domain Name Enter the domain name in less than 32 characters.
WINS Server
(Pri.)
WINS Server
(Sec.)
Scope ID
Description
Switch between Network 1, Network 2, and IP-Filters settings.
Input a scanner host name no longer than 32 characters.
Enter the scanner interface IP address in 'XXX.XXX.XXX.XXX' notation. A
change verification dialog box is displayed when settings are saved. Verify the
IP address.
Enter the scanner interface subnet mask in 'XXX.XXX.XXX.XXX' notation.
Enter the scanner default gateway in 'XXX.XXX.XXX.XXX' notation. The
default gateway is used to transfer packets to other networks or subnets.
Set DHCP and BOOTP to either ON or OFF. The default setting is ON.
Set RARP to either ON or OFF. The default setting is ON.
Set ARP/PING to either ON or OFF. The default setting is ON.
For sending data using host names in environments that have DNS servers
available, enter the primary DNS server IP address in this field in
'XXX.XXX.XXX.XXX' notation.
Enter the secondary DNS server IP address in 'XXX.XXX.XXX.XXX' notation.
To use WINS (Windows Internet Name Service) to resolve computer names
from IP addresses, enter the primary WINS server IP address in
'XXX.XXX.XXX.XXX' notation.
Enter the secondary WINS server IP address in this field in
'XXX.XXX.XXX.XXX' notation.
Enter the Scope ID in this field.
Included Scanner Utilities
6-17