Kyocera KM-C2525E Advanced Operation Manual page 148

Scanner Settings
Setting Image Quality
The following settings are available from the scanner function screen's [Quality] tab.
•
•
•
•
•
Exposure Level
Adjust the scanned image density.
Item
Manual (1 - 7)
Auto
NOTE: [Auto] is available only when selecting [Black&white] under B&W Setting and color mode is
set to either Black&White or Auto Color. Additionally, when performing a full color scan with Auto
Color, even if [Auto] is selected, scan density is corrected according to the default [Manual] value.
Background Exposure Adjust
Lightens the background of color originals with dark backgrounds.
Item
On (1 - 5)
Off
NOTE: Background exposure adjust is not available when B&W setting is set to [Black&white].
Additionally, background exposure adjust does not function when scanning in [Black&white] under
Auto Color mode.
4-6
Ready to scan.
Place the original and select destination.
Scan to PC-Sending
Destination
Save at
User PC
Exposure Level...4-6
Background Exposure Adjust...4-6
Original Image Quality...4-7
Sharpness Adjust...4-7
B&W Setting...4-7
Description
Manually adjust the scanned image density.
Density can be adjusted in either 7 or 13 steps.
The appropriate density is set by detecting the density of the original.
Description
Adjust the background with presets (1 - 5).
Do not adjust the background exposure.
( Full-Color
Register Prgrm
Density 4
Scanning
Density
Off
Delete
Background
exp. adj.
Address
Basic
Book
) Original Send
11×8½" 8½×11"
08/08/'05 14:00
Cont. TX to Cancel
Text + Photo
Orig.Image B&W
Quality setting
Off
Sharp File Type
-ness
Quality Edit