Table of Contents
Advertisement
Using the Multi-Purpose tray as a manual feed station
Follow this procedure to use the tray as a manual feed station. In this setting, you will
have to feed one sheet at a time. Use manual feed for media that should be printed one
sheet at a time, such as overhead transparencies which tend to stick together when
stacked.
Turning on manual feed
Follow this procedure to turn on manual feed with the printer control panel.
1
Press Go to take the printer off-line. At this time, make sure the On Line indicator is
off. The READY message will be changed as follows:
PAUSED
2
Press Menu to display the first menu name in the top line.
PCL MENU
3
Press Menu until you see FEEDER MENU in the top line.
FEEDER MENU
4
Press Item until you see MANUAL in the bottom line.
FEEDER MENU
MANUAL=OFF
5
Press Value to change the setting to ON.
FEEDER MENU
MANUAL=ON
38
Printing from the Multi-Purpose Tray
If you are running your software application under Microsoft Windows, you
can set the printer for manual feed from the printer driver supplied with your
printer.
*
Advertisement
Table of Contents
