Dedicating the printer to one personality
Follow the procedure below to dedicate the parallel port to one personality.
Press Go to take the printer off-line. The On Line indicator should go off. PAUSED
will appear in the display.
Press Menu until you see PARALLEL1 MENU (PARALLEL2 MENU) in the top
Press Item. PERSONALITY=AUTO will appear in the bottom line.
Press Value to select the personality you want to dedicate to the parallel port and press
Enter. Choose PERSONALITY=PS for PostScript.
-or Choose PERSONALITY=PCL for regular printing.
Press Go to put the printer back on-line.
Printer Personality Switching