Place the toner cartridge on a flat, stable surface.
Grip the end of the tab and snap it in the direction shown q. Make sure that the tab
itself is detached from the cartridge. Then straighten out the tab, as shown in the picture
While grasping the cartridge with one hand as shown, firmly and slowly pull the tab
with the other hand to remove the 533 mm (21 in.) length strip of sealing tape. Throw
the tape away. To avoid breaking the tape, do not pull the tape out at an upwards or
If the tab breaks off the tape, pull the tape out by pulling on the end of the tape where
the tab was originally attached.
Replacing a Toner Cartridge
If you get loose toner powder on your hands or clothing, wash it off with