If you want to change the setting, press Value until the value you want is displayed.
Then press Enter.
0 to 15
If you want to exit or return to the item level without making any changes, press Item.
If you want to return to the menu level without making any changes, press Menu.
If you want to go back on-line without making any changes, press Go.
Using the Menu Operation Flow at the back of this manual as a reference, take a few
minutes to look at some of the other menus, items and values.
A Quick Tour of the Printing Environment
For a darker setting, select a higher number. A darker setting consumes more toner.
For a lighter setting, select a lower number. A lighter setting consumes less toner.
Standard density setting.
Press Value to cycle to a higher number. Press and hold to cycle
through the settings quickly.
Press Shift and Value to cycle to a lower number. Press and hold
to go back through the settings quickly.
• Some menus and items will not be displayed until the corresponding
options are installed. For example, you won't see the PS MENU or any of
the PostScript items unless the optional A-32 module for Adobe PostScript
3 has been installed in your printer.
• When the printer is off-line, and PAUSED is displayed in the printer
control panel, you can cancel a job by pressing Enter while holding down