The information below refers to the sample on the previous page.
q Font #
w Font ID
e Symbol Set
t Pitch (cpi)
y Point size
i Stroke Weight
o Name of Typeface
!0 Default Orient
!1 Print sample and Escape Sequence
Printing the Font Lists
The font number used to select the font from the printer control panel. The letter prefix of
the number tells you the font source.
I : Resident
S: Permanent soft font
F: Flash ROM font
The user-allocated numbers for soft fonts downloaded to the printer.
The name of the Symbol Set (see page 162).
Whether the font is a fixed, non-proportional font (F) or a proportional font (P).
The pitch and point size. For a scalable font, Scale is displayed.
The measured vertical distance in points (72 points=1 inch) from the top of the capital
letters to the tail of the letter y.
Upright (straight) characters or italic (slanted) characters.
The stroke weight of the characters in the font.
The typeface name.
The orientation of the print. Default orientation for all fonts is portrait.
Sample font print and the PCL commands used to select this font.
Only information about printer resident fonts and permanently downloaded fonts is
printed. Information about soft fonts temporarily downloaded for a job cannot be
printed in this list.
When permanent fonts are downloaded to the printer, only the details about the
downloaded soft fonts are provided in the list. Information about the printer resident
fonts is not available when permanent soft fonts are downloaded to the printer.