IN <TRAY> ( )
The specified paper source must be loaded with the requested paper size. To
continue the print job, you may have to press Go.
If a paper source runs out of paper during printing, reloading the paper source
will allow the printer to continue printing.
For manual feed, you need to press Go to continue printing.
LOAD <SIZE> ( )
MEM ALLOC ERROR
Responding to Error Messages
Load the appropriate tray with the correct paper size, according to
The internal 250 Sheet Universal Cassette UC-32
The optional Canon 250 Sheet Paper Feed Unit PF-32
The Multi-Purpose tray on the printer
Any tray that can support Letter-, Legal-, A4-, A5-, Executive-, or
Letter size paper: 8
Legal size paper: 8
Commercial #10 envelopes
Paper loaded from the Multi-Purpose tray or manual feed.
Unknown paper size
Load the Multi-Purpose tray with the specified paper.
You must press Go to continue printing.
There is not enough memory available to process the data and
print the page. If AUTOCONT is ON (CONFIG MENU), the print job
will resume after 10 seconds.
If AUTOCONT is OFF, you must press Go to resume printing. Check the
printed page to ensure that it is complete.