JAM RECOVERY allows printing to resume automatically once a paper jam has been
removed. JAM RECOVERY can be set for PCL and PostScript personalities.
AUTOCONT (automatic continue) determines how the printer reacts to errors. If the
printer is part of a network or remote spooling system, then set AUTOCONT=ON.
Press Go to take the printer off-line
Press Menu to display the first menu name
Shaded menus appear after an option has been installed. E.g. A-32 module with
the Adobe PostScript 3 software.
If there is insufficient memory, MEMCONFIG may not appear, even after the A-32
module has been installed.
The printer does not resume printing automatically after the paper
jam has been removed. You must start the print again. You may
want to use this setting to conserve memory.
The printer reserves enough memory to hold the data for the page
that jams and automatically reprints the page that jammed. With
this setting, printing speed is slightly slower. Use this setting if
there is sufficient memory available.
The printer displays a message, goes off-line for about 10 seconds
and then automatically goes back on-line and resumes printing.
The printer displays a message, goes off-line and waits for you to
correct the problem. Press Go to resume operation.
The Standard Printing Environment Settings