Loading Paper ..............7 Step6 Installing the Software ..........8 Installing the CAPT (Plug & Play) ........8 Appendix ................15 Using the Canon LASER SHOT LBP-1120 CD-ROM ..15 Manuals for the Printer Getting Started Guide (This document) CD-ROM...
Preface Trademarks LBP, Canon, LASER SHOT, and the Canon Logo are trademarks of Canon Inc. Conventions Microsoft ® , Windows ® , Windows logo, and MS-DOS are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or in The following symbols are used in this manual to explain procedures, other countries.
IMPORTANT Unpacking and Setting If the room temperature rises abruptly, or the printer is moved from a cool and dry place to a warm and humid place, condensation may form inside the Up the Printer STEP1 printer and cause problems with paper delivery or a deterioration in print quality and, in some cases, result in printer error.
M CD-ROM M Power code [User Software for LBP-1120] (Example: 120 V Model) M LBP-1120 printer • CAPT (Canon Advanced Printing Remove the cartridge from its protective bag. Technology) software • USB driver • User’s guide • Getting started guide...
Place the cartridge on a sturdy surface. Snap the tab at the end of the cartridge Insert the cartridge into the printer along the guides. Make sure that the backwards and fold it back and forth until it is loose. Then pull the sealing cartridge slides all the way inside the printer.
Connecting to the Power Connecting the Printer Supply to Your Computer STEP3 STEP4 NOTE CAUTION Do not connect/disconnect a USB cable in the following states: Before inserting the plug, make sure that the rating indicated on the printer • The printer driver is being installed. matches the voltage of the AC outlet.
Connect the flat shape plug of the USB cable to the USB port of the computer. Setting the Paper NOTE Supports and Loading A dialog box to start the installation of the USB driver may appear when STEP5 Paper connecting a USB cable to your computer in the state the printer is turned on.
Use the paper delivery selector to choose face-up or face-down Loading Paper into the Multi-Purpose Tray delivery. The multi-purpose tray can hold up to approximately 125 sheets of 64 g/m paper for high-volume printing. You can load Letter, Legal, A4, Executive, B5-size of plain paper into the multi-purpose tray.
Loading Paper Manually Installing the Software You can use the manual feed slot when you want to print the paper which is a different size from the paper loaded into the multi-purpose tray, STEP6 transparencies, label sheets or postcards. The manual feed slot allows you to load paper manually, one sheet at a time. The manual feed always has priority over the multi-purpose tray.
Click [Finish] when the USB driver has been installed. [Add New Hardware Wizard] dialog box and click [Next]. The Add New Hardware Wizard (Canon LASER SHOT LBP-1120) appears Insert the User Software CD-ROM into the CD-ROM drive and check only after the USB driver has been installed.
Click [Next]. Installation of the printer driver begins. When the installation is complete, the following dialog box appears. Click [OK] to close the dialog box. Click [Finish] on the [Add New Hardware Wizard] dialog box. When the installation is complete, see on p. 13. If you cannot install the software, see on p.
The [New Hardware Wizard] dialog box appears, and then the [Found New Check only [Specify a location] and click [Next]. Hardware Wizard] dialog box appears. Click [Next]. Insert the User Software CD-ROM into the CD-ROM drive, and then click Select [Search for a suitable driver for my device (recommended)] in the [Browse] to select the driver in the language that you want to install.
Click [Next] on [Driver Files Search Results]. Log on as the Administrator. Click [Yes] if the [Digital Signature Not Found] dialog box appears. NOTE Full access rights are necessary for the installation of the CAPT. The [New Hardware Found] dialog box appears, and then the [Found New Hardware Wizard] dialog box appears.
Click [Browse] to select the driver in the language that you want to install. When you install the CAPT, the [Canon LASER SHOT LBP-1120] icon is For example, if your CD-ROM drive is drive [D], browse to [D:\English\WinXP], created in the [Printers] folder, and the [Canon LASER SHOT LBP-1120] and then click [Next].
[Start] menu, and then click [System]. Delete only the following USB drivers under [Universal Serial Bus controllers]. For Windows 98, select [Canon LASER SHOT LBP-1120]. For Windows Me, select [Canon CAPT USB Printer], and click [Remove]. For Windows 2000/XP, select [USB Printing Support] or [Canon CAPT USB Printer], and uninstall from the [Action] menu.
Delete only the following: Using the Canon LASER SHOT LBP-1120 CD-ROM • For Windows 98, select [Canon LASER SHOT LBP-1120]. For Windows Me, select [Canon CAPT USB Printer], and click [Remove]. For Windows 2000/XP, select [Unknown] and uninstall from the [Action] menu.