Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Canon LASER SHOT LBP-1820
Summary of Contents for Canon LASER SHOT LBP-1820
- Page 1 The illustrations in this manual may differ from the product you are using.
-
Page 2: Table Of Contents
Table of Contents Turning the Power on ..............2 Turning the Power off ..............3 On-line and Off-line ..............4 Setting to On-line ....................4 Setting to Off-line ....................5 Paper ....................6 Compatible Paper [For LBP-1820, 1620] ..........6 Compatible Paper [For LBP-1810, 1610] ..........11 Compatible Paper [For LBP-870] .............. 16 Compatible Paper [For LBP-880, 910] ........... 19 Compatible Paper [For LBP-840, 850] ........... 21 Printable Areas ....................24 Incompatible Paper ..................25 Printing from a Paper Cassette .......... -
Page 3: Turning The Power On
Turning the Power on When you turn the power on, the status of the printer and optional device(s) is checked before printing is enabled. ● Always insert the paper cassette before turning the printer on for the first time after installing it. ● A blank sheet might come out when you turn the printer on for the first time after installing it. This is not a malfunction. Press the power switch on the right side of the printer to the ｜ position. The printer is turnd on, the operation panel indicators and the display comes on, and the status of the printer and optional device(s) is self-diagnosed. If the results of the self-diagnosis are normal, printing is enabled. The オンライン indicator, the 印刷可 indicator and the selected paper feed indicator come on and the message [00 イン サツ カノウ], appears on the display. 動作モード オンライン ジョブキャンセル 印刷可 ユーティリティ セットアップ 0 0 ｲ ﾝ ｻ ﾂ ｶ ﾉ ｳ A 4 排出... -
Page 4: Turning The Power Off
Turning the Power off When the power is turned off, all of the printing data in the memory is lost. Always check that the ジョブ indicator is off before turning the power off in order to avoid deleting important printing data by accident or deleting printing data from another computer when connected to a network. ● If the power is turned off when the ジョブ indicator is on, any printing data remaining in the printer’s memory is lost. Press the 排出 key (for LBP- 1820, 1620, press リセット key and then select [ハイシュツ]) while offline to output any important printing data before turning off the power. ● Do not turn off the power while printing. ● Do not turn off the power during the self-diagnosis carried out immediately after turning the power on. 動作モード ジョブキャンセル 0 0 ｲ ﾝ ｻ ﾂ ｶ ﾉ ｳ A 4 印刷可 ユーティリティ セットアップ メッセージ Check that the ジョブ indicator is ジョブ リセット／実行 off. -
Page 5: On-Line And Off-Line
On-line and Off-line On-line means the status of the printer when it can receive data from a computer and print. Off- line means its status when it is disconnected from a computer and cannot receive data. Set the printer to offline before operating the menu with the operation panel. Setting to On-line When printing from the computer, the printer must be on-line. Check that the printer is on-line when printing. If it is not on-line, follow the instructions below to set it to on-line. When the power is turned on, the printer is automatically set to on-line. オンライン 排出 Press the オンライン key to turn 両面 on the オンライン indicator. 給紙選択 Printing can be carried out. 00 ｲﾝｻﾂ ｶﾉｳ ● The printer is not on-line when there is a printer error (when the メッセージ indicator is on or the numbers in the message are flashing). Remove the cause of the error and then set the printer to on-line. ● The printer is not on-line during operations such as selecting a menu function or paper feed method, setting the paper size or cleaning the fixing assembly. Complete the operation and then set the printer to on-line. ● Never open the printer cover or cassette during printing. The printer might stop and printing might be disabled. ● If the printer is set to panel off mode, the オンライン indicator goes out when the printer moves to panel off mode even if the printer is still on-line. The オンライン indicator automatically comes back on when printing data is sent or an operation panel key is pressed. -
Page 6: Setting To Off-Line
Setting to Off-line The printer must always be off-line when selecting a menu operation or paper feed method or setting the paper size from the printer’s operation panel. When using the operation panel keys, follow the instructions below to set the printer to off-line. オンライン 排出 Press the オンライン key to turn 両面 off the オンライン indicator. 給紙選択 Setting can be carried out using the operation panel. 00 ｲﾝｻﾂ ｶﾉｳ ● Printing cannot be carried out from the computer when the printer is offline. A message such as [プリンタの準備ができていません] or [プリンタが接続 されていません] appears. ● Never open the printer cover or cassette during printing. The printer might stop and printing might be disabled. ● If the printer is not touched while off-line for over 5 minutes, it automatically returns to on-line. It does not do so, however, if there is a printer error (if the メッセージ indicator is on or the numbers in the message are flashing) or during an operation such as selecting a menu function or paper feed method or setting the paper size. -
Page 7: Paper
Paper Use the correct paper in order to get the best performance from your printer. Using incompatible paper can lead to reduced printing quality and paper jamming. Compatible Paper [For LBP-1820, 1620] This printer can use the following types of paper. ◎ indicates that both single-side and duplex printing using a duplex unit can be performed, ○ indicates that only single-side printing can be performed, and × indicates that printing cannot be performed. ■ Paper Sizes Paper source Paper tray Paper cassette 250-sheet 500-sheet Paper type paper feeder paper feeder (option) (option) Plain paper (64-90 g/m ○ × × × ◎ ◎ ◎ ◎ ○ × × × ◎ ◎ ◎ ◎ ○ × × ×... - Page 8 ■ No. of Sheets Stored in Paper Sources Paper source Paper tray Paper cassette 250-sheet 500-sheet Paper type paper feeder paper feeder (option) (option) Plain paper (64 g/m approx. 100 approx. 250 approx. 250 approx. 500 Thick paper (128 g/m approx. 50 × × × Transparencies approx. 50 × × × Label sheet approx. 40 × × × Postcard approx. 40 × × × Stamped, self-addresed postcard approx. 40 × ×...
- Page 9 Paper Size Abbreviations The following abbreviations indicate the size of the paper cassette used with the printer. Paper size indicator dial Paper size of paper cassette Ledger 11 × 17 Legal Letter LTR* Executive EXEC Letter R** LTR-R** User paper** CUSTOM** *LETTER when using 500-sheet paper feeder **Only when using 500-sheet paper feeder ● Plain paper You can use A3-, B4-, A4-, B5- A5-, B6-, Ledger-, Legal-, Letter- and Executive-size plain paper of 76.2 - 312.0 mm width, 127 - 469.9 mm length and 64 - 90 g/m weight with this printer. Plain paper can be fed from the paper cassette or paper tray. Automatic duplex printing is possible only with standard size paper other than B6. ● Thick paper You can use A3-, B4-, A4-, B5-, A5-, B6-, Ledger-, Legal-, Letter- and Executive-size thick paper of 100 - 297 mm width, 148 - 432 mm length and 91 - 128 g/m weight with this printer. Thick paper can be fed from the paper tray. ● Transparencies It can be difficult to separate transparencies from each other. Pick them up one at a time and by all four sides, and then load them into the paper tray. ● When printing face up on transparencies, remove the transparencies one at a time as they come out. ● Label sheet Check that the label sheet is face up when you load it into the paper tray.
- Page 10 ● Postcards/Stamped, self-addressed postcard Load postcards with the print side face up in the paper tray. If you want to print on the side that the address will be written, load postcards with the print side face up and the top edge of the postcards going into the printer first. ● Do not use postcards other than official postcards. If other types of postcards are used, this may cause a deterioration in the print quality as well as paper jams. ● You can use only stamped, self-addressed postcard without creases. ● When the edges of postcards are curled, bend them back in the opposite direction to straighten them before loading them in the multi-purpose tray. ● Do not use postcards for ink jet printers. ● You cannot load postcards and stamped, self-addressed postcards in the landscape orientation. Be sure to load them in the portrait orientation. ● When printing on stamped, self-addressed postcards, make sure that the application page setup and orientation settings match the way the postcard are loaded in the paper tray. (Example: [往復はがき横] for Windows NT 4.0/ 2000)
- Page 11 ● Envelopes Press the envelope with your hands to expel any air pockets and press down on the edges. Then load it with the print side face up in the paper tray. Youkei No.4 (105 mm × 235 mm) (Envelope Y401 for Canon LBP/recommended) * You cannot use envelopes with a flap along the short edge. ● Never use the following types of envelopes. If envelopes that do not conform to specifications are used, this may cause hard to clear paper jam or a printer malfunction. - Envelopes with fasteners or snaps. - Envelopes with a window cut. - Self-adhesive envelopes - Envelopes with wrinkles or creases. - Envelopes with very irregular thickness at the folds or overlaps. - Envelopes with irregular shapes not rectangle. ● Do not print on the back of envelopes.
-
Page 12: Compatible Paper [For Lbp-1810, 1610]
Compatible Paper [For LBP-1810, 1610] This printer can use the following types of paper. ◎ indicates that both single-side and duplex printing using a duplex unit can be performed, ○ indicates that only single-side printing can be performed, and × indicates that printing cannot be performed. ■ Paper Sizes Paper source Paper tray Paper cassette 250-sheet 500-sheet Paper type paper feeder paper feeder (option) (option) Plain paper (64-105 g/m ○ × × × ◎ ◎* ◎* ◎* ○ × × × ◎ ◎* ◎* ◎* ○ × × × ◎ ◎* ◎* ◎* ◎... - Page 13 ■ No. of Sheets Stored in Paper Sources Paper source Paper tray Paper cassette 250-sheet 500-sheet Paper type paper feeder paper feeder (option) (option) Plain paper (64 g/m approx. 100 approx. 250 approx. 250 approx. 500 Thick paper (128 g/m approx. 50 × × × Transparencies approx. 50 × × × Label sheet approx. 40 × × × Postcard approx. 40 × × × Stamped, self-addresed postcard approx. 40 × ×...
- Page 14 Paper Size Abbreviations The following abbreviations indicate the size of the paper cassette used with the printer. Paper size indicator dial Paper size of paper cassette Ledger 11 × 17 Legal Letter LTR* Executive EXEC Letter R** LTR-R** User paper** CUSTOM** *LETTER when using 500-sheet paper feeder **Only when using 500-sheet paper feeder ● Thick paper Paper which is 106-128 g/m can be used with this printer. Always load paper of this thickness into the paper tray. ● Transparencies It can be difficult to separate transparencies from each other. Pick them up one at a time and by all four sides, and then load them into the paper tray. ● When printing face up on transparencies, remove the transparencies one at a time as they come out. ● Label sheet Check that the label sheet is face up when you load it into the paper tray. ● Do not use the following types of label sheet. There is a risk of severe jamming and damage to the inside of the printer. ・ Label sheet with some adhesive surfaces exposed ・ Label sheet with some parts of the lower surface exposed on the upper surface ・...
- Page 15 ● Postcards/Stamped, self-addressed postcard Load postcards with the print side face up in the paper tray. If you want to print on the side that the address will be written, load postcards with the print side face up and the top edge of the postcards going into the printer first. ● Do not use postcards other than official postcards. If other types of postcards are used, this may cause a deterioration in the print quality as well as paper jams. ● You can use only stamped, self-addressed postcard without creases. ● When the edges of postcards are curled, bend them back in the opposite direction to straighten them before loading them in the multi-purpose tray. ● Do not use postcards for ink jet printers. ● You cannot load postcards and stamped, self-addressed postcards in the landscape orientation. Be sure to load them in the portrait orientation. ● When printing on stamped, self-addressed postcards, make sure that the application page setup and orientation settings match the way the postcard are loaded in the paper tray. (Example: [往復はがき横] for Windows NT 4.0/ 2000)
- Page 16 ● Envelopes Press the envelope with your hands to expel any air pockets and press down on the edges. Then load it with the print side face up in the paper tray. Youkei No.4 (105 mm × 235 mm) (Envelope Y401 for Canon LBP/recommended) * You cannot use envelopes with a flap along the short edge. ● Never use the following types of envelopes. If envelopes that do not conform to specifications are used, this may cause hard to clear paper jam or a printer malfunction. - Envelopes with fasteners or snaps. - Envelopes with a window cut. - Self-adhesive envelopes - Envelopes with wrinkles or creases. - Envelopes with very irregular thickness at the folds or overlaps. - Envelopes with irregular shapes not rectangle. ● Do not print on the back of envelopes.
-
Page 17: Compatible Paper [For Lbp-870]
Compatible Paper [For LBP-870] This printer can use the following types of paper. ◎ indicates that both single-side and duplex printing using a duplex unit can be performed, ○ indicates that only single-side printing can be performed, and × indicates that printing cannot be performed. ■ Paper Sizes Paper source Paper tray Paper cassette 250-sheet 500-sheet Paper type paper feeder paper feeder (option) (option) Plain paper (64-105 g/m ○ × × × ◎ ◎* ◎* ◎* ○ × × × ◎ ◎* ◎* ◎* ○ × × × ◎ ◎* ◎* ◎* ◎... - Page 18 ■ No. of Sheets Stored in Paper Sources Paper source Paper tray Paper cassette 250-sheet 500-sheet Paper type paper feeder paper feeder (option) (option) Plain paper (64 g/m approx. 100 approx. 250 approx. 250 approx. 500 Thick paper (128 g/m approx. 50 × × × Transparencies approx. 50 × × × Label sheet approx. 40 × × × ■ No. of Sheets Output Output Paper type Face-down tray Face-up tray Plain paper (64 g/m approx. 250 approx. 50 Thick paper (128 g/m approx. 150...
- Page 19 ● Thick paper Paper which is 106-128 g/m can be used with this printer. Always load paper of this thickness into the paper tray. ● When printing with thick paper, always set [用紙タイプ] in the printer driver’s [給紙] sheet (or [デフォルト用紙タイプ] in the set-up menu if you are using an OS which cannot run a Windows printer driver) to [厚紙]. ● Transparencies It can be difficult to separate transparencies from each other. Pick them up one at a time and by all four sides, and then load them into the paper tray. ● When printing on transparencies, always set [用紙タイプ] in the printer driver’s [給紙] sheet (or [デフォルト用紙タイプ] in the set-up menu if you are using an OS which cannot run a Windows printer driver) to [OHP]. ● When printing face up on transparencies, remove the transparencies one at a time as they come out. ● Label sheet Check that the label sheet is face up when you load it into the paper tray. ● Do not use the following types of label sheet. There is a risk of severe jamming and damage to the inside of the printer. ・ Label sheet with some adhesive surfaces exposed ・ Label sheet with some parts of the lower surface exposed on the upper surface ・ Label sheet with labels that peel off easily ● When feeding label sheet sideways, remove each sheet by hand one at a time. The first sheets printed out might curl. ● Duplex printing with a duplex unit ● If both a 500-sheet paper feeder and a duplex unit are installed, you cannot duplex print with the duplex unit on user paper loaded in a 500-sheet paper cassette.
-
Page 20: Compatible Paper [For Lbp-880, 910]
フツウシ (64 g/m Letter, Legal, Ledger width: 76.2-312 mm approx. 100 Paper tray Plain paper 64-105 フツウシ length: 127-469.9 mm (64 g/m width: 100-297 mm approx. 50 Thick paper 106-128 アツガミ length: 148-432 mm (128 g/m A4 (Canon domestic LBP ̲ Transparencies approx. 50 transparencies: 8.7 g) A4 (Canon domestic label ̲ Label sheet approx. 40 フツウシ sheet: 7.8 g) ● Load plain paper of over 90 g/m into the paper tray. ● Always load user paper (user defined paper) lengthways. ● Optional extra RAM is necessary for printing on paper larger than Ledger size, such as A3 full breed paper (312 440 mm). × ● A3 full breed paper (312 ... - Page 21 Paper Size Abbreviations The following abbreviations indicate the size of the paper cassette used with the printer. Paper size indicator dial Paper size of paper cassette Ledger 11 × 17 Legal Letter LTR* Executive EXEC Letter R** LTR-R** User paper** CUSTOM** *LETTER when using 500-sheet paper feeder **Only when using 500-sheet paper feeder ● Thick paper Paper which is 106-128 g/m can be used with this printer. Always load paper of this thickness into the paper tray. ● Transparencies It can be difficult to separate transparencies from each other. Pick them up one at a time and by all four sides, and then load them into the paper tray. ● When printing face up on transparencies, remove the transparencies one at a time as they come out. ● Label sheet Check that the label sheet is face up when you load it into the paper tray. ● Do not use the following types of label sheet. There is a risk of severe jamming and damage to the inside of the printer. ・ Label sheet with some adhesive surfaces exposed ・...
-
Page 22: Compatible Paper [For Lbp-840, 850]
Compatible Paper [For LBP-840, 850] ■ Paper Compatible for the Paper Cassette The following standard sizes of paper can be loaded into the paper cassette. Output sheet no. Paper type Size (Weight) Max. sheet no. Face down Face up A5, B5, A4, A4R, B4, A3, approx. 250 Plain paper Executive, Letter, Legal, approx. 250 approx. 50 (64 g/m Ledger (64-90 g/m ● Load plain paper of 91-105 g/m into the paper tray. ● A maximum of approximately 500 sheets (64 g/m ) can be loaded into the optional 500-sheet paper feeder. ● In addition to the above paper sizes, Letter R and User paper can also be loaded into the optional 500-sheet paper feeder. Paper Size Abbreviations The following abbreviations indicate the size of the paper cassette used with the printer. Paper size indicator dial Paper size of paper cassette Ledger 11 × 17 Legal Letter LTR* Executive EXEC... - Page 23 Size (Weight) Max. sheet no. Face down Face up width: 76.2-312 mm, length: approx. 100 Plain paper approx. 250 approx. 50 127-469.9 mm (64-105 g/m (64 g/m width: 100-297 mm, length: approx. 50 Thick paper approx. 150 approx. 30 148-432 mm (106-128 g/m (128 g/m A4 (Canon domestic LBP Transparencies approx. 50 approx. 100 Transparencies: 8.7 g) A4 (Canon domestic label Label sheet approx. 40 approx. 100 approx. 20 sheet: 7.8 g) ● Always load user paper (user defined paper) lengthwise. ● Optional extra RAM is necessary for printing on paper larger than ledger size, such as A3 full breed paper (312 440 mm). × ● A3 full breed paper (312 440 mm), ledger full breed paper (12" 18") × ...
- Page 24 ● Duplex printing with a duplex unit ● If both a 500-sheet paper feeder and a duplex unit are installed, you cannot duplex print with the duplex unit on user paper loaded in a 500-sheet paper cassette.
-
Page 25: Printable Areas
Printable Areas This printer can print over areas of paper within the following ranges. ● Plain paper, thick paper, ● A3 full breed paper, ledger full transparencies, label sheet breed paper (except full breed) 5.3 mm 4.7 mm 5 mm 5 mm 4.3 mm 5 mm 5 mm 5.7 mm * The printer may not be able to print correctly in areas 5 mm from the top, 10 mm from the bottom and 7.5 mm from each side. ● Postcard/Stamped, self-addressed post card (LBP-1820, 1620, 1810, 1610 only) 100 mm 200 mm 5 mm 5 mm 148 mm 148 mm 5 mm 5 mm 5 mm 5 mm... -
Page 26: Incompatible Paper
Incompatible Paper In order to avoid paper jams and damaging the printer, do not use the following kinds of paper. ● Paper that jams easily ・Paper that is too thick or too thin ・Non-standard size paper ・Wet or damp paper ・Torn paper ・Coarse or extremely smooth paper ・Paper with binder holes, serrated paper ・Curled paper, creased paper ・Specially coated paper ・Label sheet with labels that peel off easily ・Paper which has already been used for photocopying or laser printing (reverse side also incompatible) ・Paper which has raised surfaces ・Wrinkled paper ・Folded paper ● Heat-sensitive paper ・Paper with ink that melts, burns or gives off toxic vapours in the heat of the fixing assembly ｡ (approx. 150 ・Thermal paper ・Color paper with a processed surface ・Specially coated paper ・Paper with adhesive on it ● Paper that can cause printer malfunction or damage ・Carbon paper ・Paper with staples, clips, ribbons or tape attached ・Paper which has already been used for photocopying or laser printing (reverse side also incompatible) ● Paper on which toner cannot fix easily ・Coarse paper such as pulp paper and Japanese writing paper ・Paper with rough fibers ・Specially coated paper... -
Page 27: Printing From A Paper Cassette
Printing from a Paper Cassette 250-sheet paper cassette and 500-sheet paper cassette can be loaded with A5, B5, A4, A4R, B4, A3, Executive, Letter, Legal and Ledger size plain (64-90 g/m ) paper. 500-sheet paper cassette can also be loaded with Letter R and User paper. Each type of paper is loaded as shown below. Sideways feed Executive Letter Lengthways feed Letter R (500-sheet paper cassette only) Legal Ledger Follow the precautions below in order to avoid paper jamming. ● Do not remove the paper cassette during printing. Doing so can lead to paper jamming or damage. ● Only load plain paper (64-90 g/m ● Do not load paper which has raised parts, creases or curled edges. ● Do not load paper beyond the paper limit mark. The number of plain (64 g/m ) sheets that can be loaded are approximatey 250 in the 250-sheet paper cassette and approximatey 500 in the 500-sheet paper cassette. ● See p. 6 to 13 for details of the kinds of paper that can be used. ● Refill with paper after the loaded paper has run out. Refilling with paper before it has run out can lead to incorrect paper feeding. ● Duplex printing cannot be performed on user paper (user defined paper). - Page 28 ■ 250-sheet paper cassette Paper is loaded into the 250-sheet paper cassette by the same procedure as loading the standard paper cassette into the printer. ■ 500-sheet paper cassette Follow the instructions below when loading paper into the 500-sheet paper cassette. When loading paper, remove the paper cassette from the paper feeder. Hold the rear paper size guide lever and slide it to the mark indicating the new paper size. Rubber roller ● Never touch the rubber roller at the front of the paper cassette. Doing so could lead to a paper feed malfunction. Hold the left paper size guide lever and slide it to the mark indicating the new paper size loaded. The side paper guide levers operate together.
- Page 29 Fan the paper, then straighten the edges. Paper limit mark Load the paper up to the paper limit mark on the rear paper size guide and push the front edge of the paper down so that both sides are under the retaining clips. Retaining clips ● Make sure that stack is not higher than the paper limit mark on the paper size guide. Stack the paper against the left paper size guide. Left paper size guide ● Always stack the paper against the left paper size guide. If you do not, printing quality will be impaired.
- Page 30 The pressure control lever is pushed to the front when ● is displayed and to the back when ○ is displayed. ● The pressure control lever can regulate the lifting power of the paper between two levels. Various quantities of paper can be smoothly fed by setting the pressure control lever to ● or ○, depending on the quantity and weight of the loaded paper. Set the paper series lever and paper size indicator dial according Paper size Paper series to the size of the loaded paper. indicator dial lever The factory setting is A4. When non- Japanese paper such as Letter paper or Legal paper is loaded, switch the paper series lever before adjusting the paper size indicator dial.
- Page 31 Insert the paper cassette into the printer. Insert it slowly until its front surface is flush with the front surface of the printer. ● Always insert the paper cassette before turning the printer on for the first time after purchasing it. ● A blank sheet might come out when you turn the printer on for the first time after purchasing it. This is not a malfunction.
-
Page 32: Paper Jams (How To Remove Jammed Paper)
Paper Jams (How to Remove Jammed Paper) If a paper jam occurs inside the printer for any reason during printing, an alarm sounds and the message [13 ヨウシガ ツマリマシタ] appears on the display. When a paper jam occurs, follow the instructions below to remove it and restart printing. If the message does not disappear even when the jammed paper is removed according to this procedure, there may be some scraps of paper left inside the printer. Inspect each part of the printer again and remove all jammed paper. Removing jammed paper When a paper jam occurs, remove the toner cartridge first and then lower the fixing assembly pressure release levers. Then remove the paper. Make sure that you have a toner cartridge protective bag or thick cloth on hand to protect the toner cartridge. ● Always remove the toner cartridge before you try to remove any jammed paper. This makes it easier to remove the jammed paper. ● Leave the printer on while removing the jammed paper. If you turn the printer off, the data that is being printed will be lost. ● If you try to remove the paper by force, the paper may tear or the inside of the printer may be damaged. When you remove the jammed paper, make sure you pull it in the proper direction according to its position. ● If the jammed paper is torn, make sure you look for any remaining scraps of paper and remove them. - Page 33 ■ How to remove jammed paper Appears when paper jams. Check all messages on the display. 13 ﾖｳｼｶﾞ ﾂﾏﾘﾏｼﾀ ｳｴ ｶﾊﾞｰ ｴﾘｱ If there is more than one message, each message will be displayed in turn. Check all The location of the jamming is messages. Messages will no longer be displayed. displayed after one of the printer covers has If there is jamming at more than been opened so make a note of them as one location, they are all displayed in sequence. necessary. The messages indicate the area where the paper jam has occurred. The list below shows the messages that can be displayed. If more than one message is displayed, make a note of all of them and check them in the order indicated. Display messages Location of paper jam Order of inspection [ウエ カバー エリア] Top cover area [ハイシ エリア] Output area [キュウシ エリア] Paper feed area [リョウメン ユニット] Duplex unit area [カミヅマリ ショリ トレイ] Jamming treatment tray area Pull the opening levers on each side of the top cover forward to open the cover.
- Page 34 Put the toner cartridge into the protective bag. ● Do not expose the toner cartridge to bright light such as direct sunlight. If you do not have a protective bag, wrap it in a thick cloth. Press the two levers on the left and right of the rear cover inwards and open the rear cover. When the duplex unit is attached, pull the rear unit back first to separate it from the main unit. Lower the left and right green fixing assembly pressure release levers to release the fixing assembly pressure.
- Page 35 If the message [ウエ カバー エリ ア] appears on the display, follow the steps on p. 27 and remove any jammed paper from the top cover side. If the message [ハイシ エリア] appears on the display, follow the steps on p. 29 and remove any jammed paper from the rear cover side. If the message [キュウシ エリア] appears on the display, follow the steps on p. 31 and remove any jammed paper from the paper cassette side. If the message [リョウメン ユニッ ト] appears on the display, follow the steps on p. 33 and remove any jammed paper from the rear unit of the duplex unit and the jamming ...
- Page 36 Raise the left and right green fixing assembly pressure release levers. Close the rear cover. When the duplex unit is attached, return the rear unit to its original position after you close the rear cover. ● When you return the rear unit to its original position, check that the upper cover of the duplex unit is closed. If the upper cover of the duplex unit is not completely closed, this could lead to a paper jam. Insert the toner cartridge.
- Page 37 Close the top cover. オンライン 排出 両面 Press the オンライン key to turn 給紙選択 on the オンライン indicator. Printing is restarted from the page where it was interrupted. 00 ｲﾝｻﾂ ｶﾉｳ A4...
- Page 38 ■ [ウエ カバー エリア] (Top Cover Area) If the message [ウエ カバー エリア] appears on the display, check the top cover area. Caution ● Do not put your hands inside the top cover immediately after using the printer. The fixing assembly and surrounding area are extremely hot. Take care not to touch any parts inside the top cover except those specified. If you do, you may get burned. ● Never touch the high pressure contact points inside the top cover. This may damage the printer. High pressure contact points ...
- Page 39 Lift the transfer guide by the green handles and remove any jammed paper. Pull the paper up slowly with both hands. Transfer guide (rear) The opening and closing angles of the ｡ transfer guides are approximately 90 both at the front and back. Do not force the guides open too far. Transfer guide (front) Caution ● If your hands or clothes get dirty from touching the toner, wash them immediately in cold water. Do not use hot water. If you do, the toner may stain permanently. ● The opening and closing angles of the transfer guides ｡ are approximately 90 both at the front and back. The guides may become distorted if you force them open too far and this could lead to reduced printing quality or the printer Transfer guide breaking down.
- Page 40 Return the transfer guide to its original position. Caution ● Replacing the toner cartridge without returning the transfer guide to its original position could damage the printer and the toner cartridge. If you cannot remove the paper from the top cover side, continue from step 8 on p. 24. If you cannot remove all of the paper and scraps of paper from the top cover side, continue from step 12 on p. 25 and return the printer to on-line status. ■ [ハイシ エリア] (Output Area) If the message [ハイシ エリア] appears on the display, check the rear cover area or the output tray area. If the message [ウエ カバー エリ ア] also appears on the display, follow the steps on p. 27 to remove any jammed paper from the top cover area. If paper has jammed in the face- down tray and you want to remove it without removing the tray, pull the ...
- Page 41 If paper has jammed in the face-up tray and you want to remove it without removing the tray, pull the paper out slowly with both hands. If you cannot remove the paper by pulling it, do not try to force it out. Go to step 4 and remove the paper from the rear cover side. Caution ● D o n o t t o u c h t h e f i x i n g assembly or surrounding area because they are extremely hot immediately after printing.
- Page 42 ■ [キュウシ エリア] (Paper Feed Area) If the message [キュウシ エリア] appears on the display, check the paper cassette or paper tray area. If the message [ウエ カバー エリ ア] also appears on the display, follow the steps on p. 27 and remove any jammed paper from the top cover area. P u l l o u t t h e s t a n d a r d p a p e r cassette, optional paper cassette and paper jamming treatment tray.
- Page 43 Slowly pull out any jammed paper with both hands. When the optional paper feeder is attached, slowly pull out any jammed paper with both hands. If you are duplex-printing, pull the paper out slowly with both hands. If the paper has jammed in the paper tray, slowly pull out any jammed paper with both hands. Load paper, the paper cassette and the jamming treatment tray. When you have removed all of the paper and scraps of paper, continue from step 12 on p. 25 and return the printer to on-line status.
- Page 44 ■ [リョウメン ユニット] (Duplex Unit Area) If the message [リョウメン ユニット] appears on the display, check the rear unit of the duplex unit or the jamming treatment tray in the main unit. If the message [ウエ カバー エリ ア] also appears on the display, follow the steps on p. 27 and remove any jammed paper from the top cover area. Open each transfer guide in the rear unit and remove any jammed paper. As shown in the three diagrams, open the cover and transfer guide of each part and pull out any jammed paper with both hands.
- Page 45 P u l l o u t t h e s t a n d a r d p a p e r cassette, optional paper cassette and jamming treatment tray. Slowly pull out any jammed paper with both hands. Load paper, the paper cassette and jamming treatment tray. When you have removed all of the p a p e r a n d s c r a p s o f p a p e r , continue from step 12 on p. 25 and return the printer to on-line status.
- Page 46 ■ [カミヅマリ ショリ トレイ] (Jamming Treatment Tray Area) If the message [カミヅマリ ショリ トレイ] appears on the display, check the jamming treatment tray inside the front of the duplex unit. (NB: Except LBP-850. Only LBP-840, 870, 880 and 910.) If the message [ウエ カバー エリ ア] also appears on the display, follow the steps on p. 27 and remove any jammed paper from the top cover area. P u l l o u t t h e s t a n d a r d p a p e r cassette, optional paper cassette and jamming treatment tray.
- Page 47 Load paper, the paper cassette and jamming treatment tray. ● When you return the rear unit to its original position, check that the top cover of the duplex unit is closed. If the top cover of the duplex unit is not completely closed, this could cause a paper jam. When you have removed all of the p a p e r a n d s c r a p s o f p a p e r , continue from step 12 on p. 25 and return the printer to on-line status.
-
Page 48: Canceling Printing (Job Cancel)
Canceling Printing (Job Cancel) (NB: Except LBP-850.) To cancel printing currently being performed, carry out job cancel. Job cancel lets you cancel a job while data is being received or processed. It does not affect the printing data for the next job or any other interface jobs for which data processing has not begun. ● Carry out job cancel offline when data is being processed (when the ジョブ indicator is on or flashing). If you press the ユーティリティ / ジョブキャンセル key when the ジョブ indicator is off, it functions as the ユーティリティ key. For LBP-1820, 1620, if you press the ジョブキャンセル key when the ジョブ indicator is off, the job cancel cannot be performed. ● Data that has already been processed and is currently being printed (when paper feeding has begun) cannot be canceled. In this case, be careful because carrying out job cancel might cancel the next printing data. ● If printing data is sent from a printer driver not compatible with this printer, multiple printing data might be canceled. Follow the instructions below to job cancel. Only carry out job cancel when the ジョブ indicator is on or flashing (when the data of the job you want to cancel is being received or processed). オンライン 排出 両面 Press the オンライン key to turn 給紙選択 off the オンライン indicator. 00 LIPS ● The above display is an example of a job in LIPS mode being processed. The display changes with the conditions of use. During job processing, the operation mode is shown in the top line and data such as user name or printer status is shown in the bottom line. - Page 49 動作モード ジョブキャンセル Press the ユーティリティ / ジョブキャンセル ユーティリティ セットアップ (for LBP-1820, 1620, ジョブキャンセル ) key. リセット／実行 The message [03 ジョブ キャンセル] appears on the display, and the data being processed is canceled. 03 ｼﾞｮﾌﾞ ｷｬﾝｾﾙ When processing takes time, such as when receiving data, the message on the display changes to [00 ジョブ スキップ]. 00 ｼﾞｮﾌﾞ ｽｷｯﾌﾟ When the message [00 インサツ カノウ] ｾﾝﾄﾛﾆｸｽ is displayed, job cancel is complete. 00 ｲﾝｻﾂ ｶﾉｳ ● When the message [00 ジョブ スキップ] appears on the display, you can press the リセット key to carry out a soft reset or hard reset. If you do so, any printing data being received or other interface printing data is lost, so carry out printing again. ● When the message [03 ジョブ キャンセル] appears on the display, you cannot carry out a soft reset or hard reset. Wait until job cancel is complete or the message [00 ジョブ スキップ] appears on the display.
-
Page 50: Checking Operation
Checking Operation This printer has a test print function for checking the printer’s status or printing quality. Perform test printing to check that the printer is working correctly after installation or whenever you want to check its operating condition. Press the power switch on the right side of the printer to the ｜ position. The message [00 インサツ カノウ] soon appears on the display, indicating that printing can be carried out. ● Always insert the paper cassette before turning the printer on for the first time after installing it. ● A blank sheet might come out when you turn the printer on for the first time after installing it. This is not a malfunction. オンライン 排出 Press the オンライン key to turn 両面 off the オンライン indicator. 給紙選択 00 ｲﾝｻﾂ ｶﾉｳ... - Page 51 動作モード ジョブキャンセル Press the ユーティリティ / ジョブキャンセル ユーティリティ セットアップ (for LBP-1820, 1620, ユーティリティ ) key. リセット／実行 The message [ステータス プリント] appears on the display. ﾕｰﾃｨﾘﾃｨ ｽﾃｰﾀｽ ﾌﾟﾘﾝﾄ → ● LBP-1810, 1610, 910, 880, 動作モード 870, 850, 840 ジョブキャンセル ユーティリティ セットアップ Press the ＜ and ＞ keys to select [テスト プリント], then press the Ｖ key. リセット／実行 The message [01 テスト プリント] appears on the display and test printing begins. ﾕｰﾃｨﾘﾃｨ ﾃｽﾄ ﾌﾟﾘﾝﾄ → ● LBP-1820/1620 01 ﾃｽﾄ ﾌﾟﾘﾝﾄ Press 実行 key. The message [01 ステータス プリント] appears on the display and the status print begins.
- Page 52 ■ Test Print Contents If the printer is working correctly, the following page will be printed. This is an example of a LBP-870 printout.