Download  Print this page

Canon LBP-1000 User Manual Page 127

Canon lbp-1000: user guide.
Hide thumbs

Advertisement

5
While using the green mark, flip the transfer guide up q. Wipe the edge and both side
of the transfer guide w and the silver metal strip e with a soft, clean cloth, to remove
toner and paper dust from both sides of the transfer guide. Then gently set the transfer
guide back to its original position r.
Green mark
Transfer charging roller
• To avoid deterioration in print quality, never touch the transfer
charging roller when you clean the metal strip.
• Never use detergents or other cleaners to clean the silver metal strip.
• If you install the toner cartridge without closing the transfer guide, the
printer and the tonner cartridge will be damaged.
• The transfer guide opens to an angle of about 90 . Do not try to force
it any further open as this could deform the guide and result in a
deterioration in print quality or a printer malfunction.
CAUTION
Never touch the high-voltage contact points inside the top cover; this
could damage the printer.
High-voltage contact points
6
Replace the toner cartridge in the printer.
7
Close the top cover and turn the printer on.
Before using the printer, make sure the transfer guide and the silver metal
strip have dried completely. Printing while the guide and the strip are wet or
damp may damage the printer.
Transfer charging roller
Cleaning the Printer
6
119

Advertisement

Table of Contents

   Also See for Canon LBP-1000

   Related Manuals for Canon LBP-1000

Comments to this Manuals

Symbols: 0
Latest comments: