7.15 Setting the System LU and User LU in the NAS System
This operation is performed using the Storage Navigator Modular. Refer to the Acer | HDS
Adaptable Modular Storage and Workgroup Modular Storage Navigator Modular Graphical
User Interface (GUI) User's Guide.
The capacity of system LU is restricted to the capacity listed in the following table:
Table 7.5
Capacity Restriction of System LU
No.
System LU
1
For system disk (CTL 0)
2
For system disk (CTL 1)
3
For volume for storing dump (CTL 0)
4
For volume for storing dump (CTL 1)
5
For command device (Note)
6
For the work for storing the dump edit result.
7
For the system sharing volume
8
For the volume for back-upping a shared volume
9
For the volume 2 for back-upping a shared volume
Note: It is required to use the extra-cost option such as ShadowImage in-system replication and Backup Restore.
Capacity Restriction
Byte Designation
15 G bytes (or more)
15 G bytes (or more)
5 G bytes (or more)
5 G bytes (or more)
35 M bytes (or more)
5 G bytes (or more)
3 G bytes (or more)
3 G bytes (or more)
3 G bytes (or more)
Acer | HDS AMS200 User and Reference Guide
Block Designation
27,369,141 blocks (or more)
27,369,141 blocks (or more)
9,619,141 blocks (or more)
9,619,141 blocks (or more)
68,360 blocks (or more)
8,193,360 blocks (or more)
4,955,079 blocks (or more)
4,955,079 blocks (or more)
4,955,079 blocks (or more)
193