Setting The Isns Server Information - Acer HDS AMS200 Reference Manual

8. Click the Apply button.
9. A confirmation message appears. After verifying that the I/O operation initiated by the
host has stopped, click the OK button.
10. A message appears, stating that the setting is completed. Click the OK button.
7.3.2

Setting the iSNS Server Information

iSNS (Internet Storage Name Service) provides the same function as the Name Server of the
Fabric Switch on the Fibre Channel interface.
The disk array subsystem registers the iSCSI port information on the iSNS Server. The host as
iSCSI initiator discovers the iSCSI target with iSCSI disk array subsystem information
registered on the iSNS Server.
1. On the Tools menu, click Configuration Settings or click the Configuration Settings
button on the toolbar.
2. Click the iSNS tab.
iSNS Server: Specify whether to use iSNS Server or not. When using the iSNS server,
–
specify the IP Address and Port Number of the iSNS Server.
3. Click the Apply button.
130 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem