Table of Contents
Advertisement
4. From the Tools menu, select Configuration Settings or click Configuration Settings on
the tool bar:
5. On the Configuration settings screen, click the LAN tab:
6. Set the Network parameter for the Network.
Note: For the head value of the IP Address, '0', '127', '255' cannot be specified. If any one
of these values is set, an error will be caused when clicking the Apply button in the
Parameter window.
7. Click Apply.
8. A confirmation message box displays. Click OK.
188
Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem
Advertisement
Table of Contents
Troubleshooting
