7.11.2 Detailed Setting For Each Host Connection - Acer HDS AMS200 Reference Manual

7.11.2 Detailed Setting for Each Host Connection

This operation is performed using the Storage Navigator-Modular.
The following describes the procedure for setting a subsystem when the host group option
setting is required for a combination that simple setting does not have.
Follow these steps:
1. On the unit window, click the Logical Status tab.
2. Double-click the Host Groups or Target (when iSCSI interface board is added). Display
the 000:G000 by double-click the Port which you want to set for the connection mode
with the host.
3. Display the Option and Logical Unit by double-clicking the 000:G000, and then select
the Option.
4. Select the Detail Setting button.
Perform the operation corresponding to the model to be set.
5. Perform the setting for the other ports in the same way as described above.
184 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem