Acer HDS AMS200 Reference Manual page 62

NNC Status: It displays the status of NAS OS.
: Operation enabled -：Operation disabled
Image
NEW
INST
ACTIVE
STOP
DOWN
BOOT
SHUTDOWN
INACTIVE
DUMP
HUNGUP
WARN
DISUSE
Note: It is necessary to recover the blocked status of the Control Unit connected to the NAS
Unit on the side where "DISUSE" is displayed.
Button
Button Name
Shutdown
Boot
Reboot
Refresh
Note: When starting the NAS OS, do not specify anything for the Boot Option.
42 Chapter 3 Powering On/Off Procedure
Status
The NAS OS is not installed.
The NAS OS is in installation process.
The NAS OS is in operation and the Node is in operation.
The NAS OS is normally stopped
The NAS OS is abnormally stopped
The NAS OS is in start process.
The NAS OS is in stop process.
The NAS OS is in operation and the Node is stopped.
A NAS Dump is being collected.
The NAS OS is hung-up.
The NAS Manager is not installed, or the NAS OS is in
operation and the status of the Node is unknown.
The Control Unit is blocked, so the NAS OS of the NNC
concerned cannot be used. (Note)
Operation
Put the NAS OS into the stop status.
Start the NAS OS.
Restart the NAS OS which is in the stop status. The operation is not different from the "Boot" button.
Update the display information to the latest information.
Stop Start Restart
- - -
- - -
○ ○ ○
-
○ ○
-
○ ○
-
○ ○
-
○ ○
○ ○ ○
○ ○ ○
-
○ ○
○ ○ ○
- - -