Transferring Configurations From One Array To Another - Acer HDS AMS200 Reference Manual

7.8

Transferring Configurations from One Array to Another

Output the configuration information of the array unit in a text file or set configuration
using a text file. The configuration information output in a text file includes the status of
the system parameters, RAID group/logical unit and the constituent parts of the array unit.
The configuration to be set includes the system parameters and RAID group/logical unit. The
status of the constituent parts of the array unit cannot be set.
Configuration information is handled with separate text files for the system parameters and
for RAID group/logical unit.
Copying configuration information between array units can be executed by outputting a text
file of the configuration from an array unit, then using the output text file to set another
array unit.
Editing a text file to set an array unit can be executed, but it is recommended that this
function be used for the configuration of the same array unit. To change the configuration,
use individual functions.
170 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem