Acer HDS AMS200 Reference Manual page 279

The NAS Log can collect only the information on the NNC (NAS unit) connected to the
Control Unit. When no special instruction is given, collect the NAS log in Detail Mode when a
failure occurs.
Table 8.10 Collection Mode
Normal Mode
Use Collect it only when there is a
special instruction. (It is limited to
when the remote collection of Detail
Mode is impossible on the capacity
side.)
Note: For one control unit, do not collect the next NAS Log until the NAS Log collection
processing is complete. The operation is not assured when NAS Log collection is performed
at the same time from multiple WEBs and external application.
1. Click NAS Log in Trace of the menu frame.
2. Select the collection mode in NAS Log, and click it.
Collection Mode
Detail Mode
Collect "Detail Mode" uniformly
unless otherwise instructed.
Acer | HDS AMS200 User and Reference Guide
Full Mode
Collect it only when there is a
special instruction. (It is limited to
when the trouble analysis is
impossible only with Detail Mode
information.)
259