Setting Up the System
This chapter tells how to install and set up the system.
instructions on how to select a site for the system, prepare the system
for use, connect basic peripherals, and start up the system.
2.1
Pre-installation Requirements
2.1.1
Selecting a Site
Before unpacking and installing the system, select a suitable site for
the system for maximum efficiency. The system is suitable to set up
in an office environment.
Consider the following factors when choosing a site for the system:
Near a grounded power outlet
Clean and dust-free
Sturdy surface free from vibration
Well-ventilated and away from sources of heat
Secluded from electromagnetic fields produced by electrical
devices such as air conditioners, radio and TV transmitters, etc.
Setting Up the System
C h a p t e r
2 2
It gives
2-1