Acer HDS AMS200 Reference Manual page 241

This section includes the following:
Menu frame
Main frame
Version frame
8.3.2.1 Menu Frame
If the Normal Mode is displayed with the menu frame, then clicked, the proper function is
executed.
The main frame displays the following information:
Main: The main screen of Normal Mode is displayed.
Parts Information: The status of exchange parts is displayed.
Disk drive: The status of disk drives is displayed.
CTL/Battery/Cache/Loop/Host Connector: The status of controllers, cache, loop, and
host connector is displayed.
AC/ENC/Fan: The status of the power supply unit, ENC/SENC unit, and fan assembly is
displayed.
Reference
Warning Information: Fault information that was detected during device information
status is displayed.
Information Message: Fault information, detected during device operation and device
information status is displayed.
Trace
Simple Trace: A window for collecting the Simple trace is displayed.
CTL Alarm Trace: A window for collecting the CTL Alarm trace is displayed.
Others
Buzzer Volume: The screen where Buzzer Volume is set up is displayed.
Page Refresh Mode: This button sets up an on/off an automatic redisplay function.
When clicked, the on/off mode changes:
OFF display: This is not refreshed.
–
ON display: The screen of the mainframe is refreshed every 5 seconds. The refresh
–
time currently (RTC) is displayed on the right top.
Note: When the PC enters suspension status during operation while the Page Refresh Mode
is set to ON, the Web may not operate correctly after the PC is released from suspension
status. When the Web is connected for status monitoring, etc., set the power management
of the PC so that the PC does not enter suspension status.
Acer | HDS AMS200 User and Reference Guide 221