Acer HDS AMS200 Reference Manual page 222

4. On the Tools menu, select Configuration Settings or click Configuration Settings in the
tool bar.
5. Click the Time Zone tab on the Configuration Settings screen.
6. Set the IP addresses of Time Zone and NTP Server.
Time Zone: Refers to and sets the time zone.
–
Default value: (GMT+09:00) Osaka/ Sapporo/ Tokyo
Automatically adjust clock for daylight saving changes: Specifies whether to use
the summer time.
NTP Server: Refers to and sets the IP address of the NTP server.
–
Note: Input is surely required for Server 1. Input is not indispensable to Server 2 because
Server 2 is for standby.
7. Click the Apply button on the Configuration Settings screen after the setting is
completed.
8. A confirmation message appears, click the OK button.
202 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem