Acer HDS AMS200 Reference Manual page 307

Table B.4 Host Connection Parameters
Host Group Option- Simple Setting
Platforms
Alternate Path
Fail Over
Detail Setting: The following parameters will be selected automatically according to simple setting.
Host Connection Mode Standard Mode
1
Open VMS Mode
(Select one of these
Wolfpack Mode
modes)
TRESPASS Mode
Host Connection Mode HP-UX
2
PSUE Read Reject Mode
(Multiple selections)
UA(06/2A00) Suppress
Mode
NACA Mode
HISUP OFF Mode
Reset Propagation Mode
Unique Reserve Mode 1
ASL Report Mode
(Active/Passive Group)
ASL Report Mode
(Active/Passive)
ASL Report Mode
(Active/Active)
Port ID No Report Mode
Port ID Conversion Mode
TruCluster Mode
Product Serial Response
Mode
Same Node Name Mode
CCHS Conversion Mode
SPC-2 Mode
Additional Parameter: Select these parameters only when you use the appropriate function. When selected, the following
parameters belonged to the appropriate Host Connection Mode will be selected automatically.
Logical Unit Number more than or equals to 8 can be
®
recognized by HP-UX
®
TrueCopy is used by HP-UX
™
VERITAS Database Edition/Advanced Cluster for
®
Oracle RAC (Solaris™) is used
® ®
Egenera BladeFrame Is used
: Parameter that is selected automatically by simple setting.
blank: Parameter that is selected manually if needed.
Note: When making the simple setting of the host group options, select items shown on gray
backgrounds. Only when using the combination not described in the simple setting, select
the required parameter from detail settings.
None
®
Mode
( Note 3 )
®
Windows
None
MSCS None
Not Selected
Not Selected
Not Selected
Not Selected
Acer | HDS AMS200 User and Reference Guide
2000/2003
HDLM VxVM
( Note1 ) ( Note2 )
MSCS None
287