Switch Locations And Functions; Figure 4.19 Panel Assembly Switch Location; Table 4.7 Panel Assembly Switch Functions - Acer HDS AMS200 Reference Manual

4.7.3

Switch Locations and Functions

This section illustrates and describes the locations and functions for switches in the
following hardware components:
Panel assembly
Backup battery unit
Power unit
RKNAS
4.7.3.1 Panel Assembly

Figure 4.19 Panel Assembly Switch Location

Table 4.7 Panel Assembly Switch Functions
Switch
Main switch
Mode switch
BUZZER OFF SW
BUZZER OFF SW
Mode switch
Main switch
Function
Turns on/off the power:
: Power on
: Power off
Sets the local/remote mode or USP connection by the combination of turning on
and off of the four mode switches.
Pressing this switch while the buzzer sounds stops the beep. When a serious
hardware failure occurs, (electrical surges of both power supplies and so on), the
buzzer does not stop even when the button is pushed.
Acer | HDS AMS200 User and Reference Guide 75