8.6
Connecting Failure in Connection with the Web
8.6.1
Collecting Simple Trace
This function is used to download current trace information. To perform the download, a
free capacity of approximately 20 Mbytes is required in the PC.
Simple Trace of both the Control Units can be collected through one Control Unit.
It is not necessary to collect from both the controllers. (When it is collected from Control
Unit #0, File name is "smpl_trc0.dat". When collected from Control Unit #1, file name is
"smpl_trc1.dat.")
1. Click Simple Trace in the menu frame.
2. When the Simple Trace is clicked, the following window is displayed.
256
Chapter 8 Troubleshooting