11. Call your Customer Engineer.
12. End of the procedure
8.1.4
The Alarm LED Turned On
When the ALARM LED has turned on, follow these steps:
1. Identify in which components the failure resides.
Note: Refer to section 4.7.5 to identify failed components whose LEDs indicate their
respective failures.
2. Call your Customer Engineer and allow the equipment to remain in the present state.
8.1.5
The WARNING LED has Turned on or Blinks
When the WARNING LED has turned on or blinks, follow these steps:
1. Does the WARNING LED on the RKM blink?
Yes: Call your Customer Engineer. Go to step 10.
No: Go to step 2.
2. Is RKNAS connected?
Yes: Go to step 3.
No: Go to step 4.
3. Does the WARNING LED on the RKNAS blink?
Yes: Call your Customer Engineer. Go to step 5.
No: Go to step 4.
4. Is the READY LED on the RKM on?
Yes: Go to step 5.
No: Refer to section 8.1.3.
5. Is the RKNAS connected?
Yes: Go to step 6.
No: Go to step 7.
6. Is the READY LED on the RKNAS on?
Yes: Go to step 7.
No: Refer to section 8.1.3.
7. Identify in which components a failure resides in the RKM.
Note: Refer to section 4.7.5 to identify failed components whose LEDs indicate their
respective failures.
Acer | HDS AMS200 User and Reference Guide
211