Acer HDS AMS200 Reference Manual page 178

The Target dialog is displayed.
5. In the Target dialog, enter the alias and iSCSI Name.
6. Select the authentication method from the drop-down list.
Alias: Enter the alias of the Target with 32 or less alphanumeric character.
–
(Excluding \, /, : , , , ;, *, ?, ", <, >, | and ')
Spaces at the top or end are ignored. An identical name cannot be used in an
identical Port.
Authentication Method: Select the CHAP, None, or CHAP, None.
–
iSCSI Name: Enter the name of the iSCSI Name with 233 or less alphanumeric
–
character. A period (.), hyphen (-), and colon (:) can be used.
7. Select the OK button.
8. The confirmation message is displayed. Select the OK button.
158 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem