7.10.3 Port/Host Group - Acer HDS AMS200 Reference Manual

7.10.3 Port/Host Group

This setting is not required for the NAS system.
1. Edit the file for which you will set system parameters to set the array unit. This file has
a specified format. The format of the file is the same as that of the file output by the
array unit. To format a file, refer to the file output in section 7.9.
2. From the Tools menu, select Configuration Settings or click Configuration Settings on
the toolbar.
3. Click the Constitute tab.
4. Select the Input radio button in the Operation box.
5. Select the Port/Host Group radio button in the Select Configuration Information box.
6. Select the item that you want to set from the Setting Information for Input. If nothing
is selected, an error occurs. (If LUN Manager function is enabled, WWN information also
displays in the Setting Information for Input.)
7. Click Browse, and then specify the directory and name of the file to which the
Port/Host Group information is input for the File box.
8. Click Apply.
9. Port/Host Group information is entered in the specified file name. A confirmation
message box displays Click OK.
10. A message box indicating that the setting that has been made displays. Click OK.
Acer | HDS AMS200 User and Reference Guide 177