Troubleshooting Using Messages - Acer HDS AMS200 Reference Manual

In this example, the latest message is also indicated at the top.
Example:
MM/DD/YYY HH:MM:SS Cx
Y
MM/DD/YYY HH:MM:SS Cx
Y
MM/DD/YYYY: Confirmed data
HH:MM:SS: Confirmed times
Cx: Error detected Controller #
Wxxxxx: warning messages, Hxxxxx: failure messages)
: Recovery measures code
: Collecting failure information code
8.4.5

Troubleshooting Using Messages

The contents of each failure detected during operation are reported by a message. The
failures detected during operation and the state of the unit, after the main switch of this
unit is turned on, are reported.
The five types of message codes are displayed in the following table:
Table 8.4 Message Code Types
Message code
018xxxxx
Rxxxxx
Ixxxxx
Wxxxxx
Hxxxxx
8.4.5.1 Errors Detected by CUDG
When the Errors detected by CUDG are displayed, call your Customer Engineer.
: Message code (Rxxxxx: flash-detected messages, Ixxxxx: progress messages,
Message text (any number of letters)
Measures
Errors detected by CUDG.
Flash detected messages.
Progress messages.
Warning messages.
Failure messages.
:
:
:
Acer | HDS AMS200 User and Reference Guide
/
/
245