Setting The Franking Imprint - FP PostBase Vision M2 Reference Manual

5

Setting the franking imprint

Advert imprint
The illustration above shows an example of a Mailmark™ franking imprint with an
advertising imprint.
Bilingual (Welsh / English) version: You can order the bilingual version of the
'Delivered by Royal Mail' mark from FP for a fee. The current print image data is then
downloaded to your PostBase Vision M2 via a synchronisation ('System Sync'
function).
This chapter describes the required settings for franking and the additional possible
advertising imprint:
– Postage / Royal Mail product (see chapter 5.1)
– Date (see chapter 5.2)
– Advert imprint (see chapter 5.3).
You can check the franking imprint settings and the imprint quality using a zero test
print. Read more about it in chapter 5.4.
Note: The examples in this reference guide show actual postal products. In case the
Royal Mail changes prices / products on short notice, corresponding software
updates to the rate table will be made available to your franking machine in time.
However, this does not apply to the documentation for your franking machine.
Date Royal Mail product
Setting the franking imprint
Machine identification
2D indicium
Postage / Product price
37