How To Stop The Engine; How To Drive, Change Speed, Turn, Stop(Park) - OREC RM953 Instruction Manual

The starter motor consumes a large electric current, so please avoid continuous use for
more than 5 seconds. If it does not start within 5 seconds, return the engine switch to the
"stop" position, pause for 10 seconds, or more, and then repeat the same operation.
Do not put the engine switch in the "START" position while the engine is running. It may
cause a failure of the starter motor. If the engine is warm enough, start the throttle lever in
the "medium speed" position. (It does not necessarily have to be in the choke "CLOSED"
position.)
For your safety, be sure to "lock" the parking brake pedal with the brake stopper during
warm-up operation.
Reference；
Warming up the engine, it spreads oil throughout the engine and extends the life of the
engine.

4.1.2 How to stop the engine

4.2 How to Drive, Change Speed, Turn, Stop(Park)

Do not allow any untrained people(non-owners) to use this machine; it may cause an
accident or injury.
Confirm that working conditions are safe before proceeding to drive the machine. Practice
driving on a flat area at a low speed until you are used to the product and the features. If
you drive at high speeds right away, it may cause you to lose control of the machine.
① Turn the throttle lever to the low speed position.
③ Stop the engine with the key in the "STOP" position.
④ Take the ignition key from the engine switch.
⑤ At last, turn the fuel valve to the "OFF" position.
- 23 -
4.運転・作業のしかた