How To Adjust The Handle Position; How To Use The Moving Light - OREC RM953 Instruction Manual

Table of Contents

Advertisement

3) For safety reasons, if the mowing height adjustment lever is returned to the "move"
position, the knife clutch lever will also return to the "off" position in conjunction with it,
but if this method is continued, the sudden impact on the mowing belt will significantly
shorten its life. Except in an emergency, please refer to 4.4 "How to operate the mowing
machine".
4) The knife clutch lever cannot be operated with the mowing height adjustment lever in the
"move" position.
5) Use the gearshift lever (change pedal) for normal stopping operation. In an emergency,
depressing the parking brake pedal will bring the product to an emergency stop. At the
same time, the gearshift lever (change pedal) returns to the neutral "N" position.
6) Whenever leaving the unit, the engine must be stopped and the key must be removed
from the unit and kept by the owner.
4.5 How to adjust the height of the steering wheel and the seat
Bolt
② Hnadle Up & Down
Please adjust the U-nuts and bolts which secure the handle shaft.
③ Hnadle tilt
The front and rear (tilt) position of the handle can be adjusted forward and backward.

4.6 How to use the moving light

This light is intended as a mobility aid. Do not use it as a working light. Please drive at low
speed especially when moving early in the morning or at dusk. Do not move or mow g rass in
an environment where the surrounding conditions are difficult to grasp, as it is dangerous to
collide, fall, or rollover, which may result in death or injury.
Light switch
position
●The handle can be adjusted in three stages up and down
also can be adjust front and rear (tilt). The seat can be
slid forward and backward.
① Seat position
U-nut
Grab the seat slide lever, then adjust the seat for the
Natto
suitable position.
The light switch is located on the right side under the handle.
Push it to the "ON" position and push it again to the "OFF"
position. When "ON" position is selected, the switch lights up
blue.
〈Refer to 2.2 Function of each part〉
〈Refer to 2.2 Function of each part〉
- 32 -
4.運転・作業のしかた

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm883Rm953xRm883x

Table of Contents