How To Cut Weeds And Brush - OREC RM953 Instruction Manual

Reference；
Bridge Standards
Use a bridge that meets the standard and has sufficient strength.
●Length...Length is more than 3.5 times the height of the truck bed.
●Width...Width is fits the wheel width of this machine.
●Strength...Sufficient to withstand the weight of this machine and the total
⚫ A surface treatment to prevent slipping.

4.4 How to cut weeds and brush

Flat ground (open space)
Orchard
When mowing on flat ground (open space, etc.)
① In order to prevent scattering outside the field, leave the one
row of the grass outside and mow counterclockwise from
outside to inside.
② When you have finished ① mowing, mowing the
grass in a clockwise direction.
When mowing in an orchard
① To mitigate the damage to the trees by scattering, So mowing
pass the right side of the trees as much as possible.
Moving
Direction
Mowing grass discharge
- 28 -
4.運転・作業のしかた
Reference ;
If there is a lot of grass, mowing it twice.
First, increase the cutting height and
mow the grass, then set the lower cutting
height and mow again.
and mow again.
outer