OREC RM953 Instruction Manual page 32

Closed
1) If you keep working wirh grass and other debris accumulated around the engine, it
maycause fire or engine seizure. Please remove the accumulated grass debris
frequently, especially around the exhaust pipe where the temperature is high. Also,
please clean the inside of the engine cover regularly as well as the outside.
2) The mowed grass is discharged from the right side of the machine, but foreign objects
such as stones, wires, empty cans, etc. may scatter from the entire circumference of
the mowing area and cause damage to the surrounding area. If you are near a building
or in a field with a lot of foreign objects, remove them before work and mow high or
put up a sign indicating that grass cutting in progress, a guard rope, or a net to
prevent scattering to prevent people (especially children) and vehicles from entering
① Keep the right deck cover closed when mowing grass.
② Start the enigine.
〈Refer to 4.1.1 "How to start the engine"〉
③ Turn the throttle lever to the "Hi" position and let it
increase the rotation of the engine.
④ Adjust the cutting height adjustment lever to
approximately 70mm height.
⑤ Slowly turn the blade clutch lever to the "ON" position.
⑥ Position the cutting height adjustment lever to the desired
heigh.
⑦ Refer to 4.2.1 "How to drive", start the machine, and begin
working.
⑧ For finishing operations, please reverse the procedure
above.
⑨ Stop the engine.
〈Refer to 4.1.2 "How to stop the engine"〉
- 29 -
4.運転・作業のしかた