②Blade Belt( Under The Seat Bracket ); ③Belt Retainer Adjustment (Under The Seat Bracket) - OREC RM953 Instruction Manual

Tension Spring
② Blade belt adjustment (under seat bracket)
Bladebelt
③Adjusting the belt retainer (under the seat bracket)
① Set the cutting height adjustment lever to the position of about 30 mm.
② Move the Blade clutch lever to the "on" position.
③ Adjust the clearance between each belt retainer with reference to the following.
Rear side
Front side
Visually inspect the belt for damage. If it is cracked
or worn, replace it with a new one.
- 43 -
5. 点検・整備・調整
About90mm