Table of Contents
Advertisement
When inspecting or replacing the Blade, you can fix it with the cover open.
Be sure to close the Blade replacement cover while working. Mowing work with the cover open
is extremely dangerous as it causes increased scattering of foreign matter such as stones. Make
sure the cover is closed and locked when except Blade inspected or replaced.
Blade replacement cover
Seat(Seat slide and Seat suspension functions Equipped.)
⑬
Adjust the seat slide front and back by raising the slider lever in front of Seat. The suspension
can be adjustable the strength of the spring force according to the weight of the worker using
the "suspension adjustment bolt" on the front of the seat in the left photo. Turning it
clockwise will make it stronger, and turning it counterclockwise will make it weaker. After
starting the engine, the engine will stop for safety if you leave the seat when the cutting
height adjustment lever is not in the "move" position and the parking brake pedal is not in
the "lock" position (the pilot light will not go out and the engine switch is keep to (RUN)
state).
Seat Slide Lever
If the engine stops, immediately turn off the engine switch. Or Re -start the engine.
If the engine is stopping for a while, the battery will run down.
〈5.4.1
Refer to How to open and close the Blade replacement cover
- 16 -
２. 各部の名称とはたらき
Suspension adjust bolt
.〉
Advertisement
Table of Contents
