Table of Contents
Advertisement
1) If the engine does not start even though you are sitting on the seat and the cutting height
adjustment lever is set to "move" and the parking brake pedal is also locked, adjust the
safety switch. The safety switch operates when the tip of the switch is pushed in the range
of 3.0 to 5.0 mm, and if the tip of the switch is pushed outside the range, the engine will
not start. Adjust the safety switch with reference to the above figure, as the switch itself
may be damaged if it is pushed too far.
2) The safety switch under the seat may not be pushed in normally depending on th e usage
conditions. In that case, adjust it individually using the long hole of the sheet switch stay.
5.3.2 Tire Air pressure Adjustment.
If the air pressure of the left and right tires is not even, the steering wheel may shake during work.
5.3.3 Front tire inspection
If dirt or grass gets in from a small gap and leaving it for a long time may damage the wheel
of the tire, the oil seal of the front wheel, or the bearing.
Individually adjusted with the long hole of the seat switch stay.
。
① Check the tire pressure of the front and rear wheels according
to the table below.
Front Wheel
Rear Wheel
- 47 -
5. 点検・整備・調整
Tire Size
Air
3.50-7
16x7.00-8
pressure (ｋＰａ)
１２０
１4０
Advertisement
Table of Contents
