Table of Contents
Advertisement
the work area. Keep a distance of at least 15 meters from people and vehicles when
working.
3) If mud or dust clogs the cooling section, the engine and HST oil temperature will rise.
Please perform maintenance on a regular basis.
4) Be careful not to approach obstacles in the field, ditches, muddy areas, slopes (10° or
more), uneven ground, or other dangerous places.
5) When working on a slope, it is especially dangerous to stand on the upper side
(mountain side) of the product. If you slip, you may be caught in the rotating knife and
you may be seriously injured.
6) Please make sure that the engine and the knife has stopped rotating when removing
grass, wire or other foreign objects entangled in the knife.
7) Please make sure that the defective part has been repaired before starting work.
8) Please inspect the knife and knife stay before operation.
9) Always please use the dedicated tool provided to remove and install the knife. If not
used, the tightening torque may not be sufficient. There is a risk of the knife flying off
due to detachment of the mounting bolt.
10) The knife replacement cover can be fixed in the open position, but mowing with the
cover open is very dangerous as stones and other foreign objects may scatter. Please
make sure that the cover is locked in the closed position before mowing.
11) If the machine hits an obstacle during operation, stop the engine immediately and
repair any abnormalities. Resuming work without making repairs may result in an
unexpected accident.
12) The machine may slip when the grass is wet or in the rain. In addition, the grass may
get stuck in the mowing deck. It causes engine overload. In such cases, stop work and
wait until the grass is dry.
13) Never put hands or feet inside the mowing deck during operation, as the knives come
to the edge of the cover on both the left and right sides during knife rotation.
〈Refer to 3. Inspection before work〉
〈Refer to the figures below〉
- 30 -
4.運転・作業のしかた
Advertisement
Table of Contents
