Advertisement
The starter motor consumes a large electric current, so please avoid continuous use for
more than 5 seconds. If it does not start within 5 seconds, return the engine switch to the
"stop" position, pause for 10 seconds, or more, and then repeat the same operation.
Do not put the engine switch in the "start" position while the engine is running. It may
cause a failure of the starter motor. If the engine is warm enough, start the throttle lever in
the "medium speed" position. (It does not necessarily have to be in the choke `` closed ''
position.)
Reference︔
Warming up the engine, it spreads oil throughout the engine and extends the life of the engine.
For your safety, be sure to "lock" (park) the parking brake pedal with the brake stopper
during warm-up operation.
4.1.2 How to stop the engine
⑦ Insert the key into the engine switch and continue
turning the key from the "run" position to the "start"
position to start the engine.
⑧ Release the keys as soon as the engine starts.
Automatically returns to the "drive" position.
⑨ After starting the engine, push the choke lever back to
the "open" position and return the throttle lever to the
"low speed" position and warm up for a while .
① Pull the throttle lever toward you to move to the low
speed position.
② Stop the engine with the key in the "stop" position.
③ Remove the key from the engine switch.
③
Finally, move the fuel cock to the "OFF" position.
- 25 -
7. 点検表
Advertisement
