Table of Contents
Advertisement
Pic.1Belt retainer (L )
Pic.3 Belt retainer (Rear)
④Blade brake adjustment
Adjust Nut
Lock Nut
⑤Parking brake adjustment
Tighte
loosen
Brake Spring
Adjust Nut
1) Not only performance maintenance, but also regular inspection of the braking surface is
essential to maintain safety. In the case of the riding type, a serious accident may occur.
Therefore, please ask the store where you purchased the product at least once a year to
inspect it according to the annual inspection table.
Pic.2Belt retainer(R)
Left
Pic.3 Belt retainer (Rear) Right
①
The Blade will stop in about 5 seconds when the Blade
clutch lever is in the "off" position. If it does not stop, move
the brake wire adjustment nut in the direction of the arrow
to adjust. (Brake drag can cause damage to this product.)
After adjustment, securely fix with the lock nut.
② If it cannot be adjusted, the brake shoes are worn. Please
ask your dealer for replacement.
① The parking brake is located on the left rear side of the
mission and should be adjusted with the brake rod which
is connected to it.
② The adjustment is made with the adjustment nut at the rear
of the brake rod so that the rear wheel "locks" when the
parking brake pedal is fully depressed (when the pedal is
locked). Turn the adjustment nut clockwise to tighten it and
it will begin to operate quickly, and loosen it to slow it down.
- 44 -
5. 点検・整備・調整
Advertisement
Table of Contents
