Table of Contents
Advertisement
Turns the Blade rotation "ON (rotation)" and "OFF (stop)". The Blade clutch lever cannot be
operated when the cutting height adjustment lever is in the "move" position.
⑦Change pedal・Speed change Shift lever
Used for driving / stopping the machine, Driving direction and speed adjustment. Push the
change pedal forward from the neutral position to move forward, and toward the heel to
move backward. The speed can be adjusted steplessly depending on the angle of depression .
If you do not step on, it will automatically return to neutral.
Forward
Change Pedal
Backward
；
Reference
1) If you want to make it harder to return the Speed change shift lever while driving, tighten the
change brake adjustment screw (see the upper right photo) to the right (in the direction of the
arrow) to brake and make it difficult to return. Please note that it will be need heavy opertation.
2)
The Speed change pedal works together only when the Speed change shift lever is tilted to the
right and placed in the guide groove. Otherwise, the change pedal alone will move.
⑧ Drive clutch lever (Only RM883)
There is a Driving clutch lever at the lower left rear of this Machine.
Normally, use it in the "ON" position. Only when the engine cannot be started, such as when
the battery is dead or when moving indoors, setting the "OFF" position makes it easier to push
the unit to move it.
Drive clutch Lever (RM883)
Speed chang Shift lever
Sub shift lever
ー
F
※RM953
Differential lock lever
- 14 -
２. 各部の名称とはたらき
Change brake
R
Adjustment screw
Advertisement
Table of Contents
