Table of Contents
Advertisement
⑭Handle tilt lock lever
The angle of the handle position can be adjusted according to the physique of the worker.
Loosening the lock lever and tighten it at any position to lock it. The lever will be free when
pulled up. After deciding the steering wheel angle, you can fix it at the desired position.
Do not operate the handle tilt while driving as it is dangerous.
⑮Fuse box
Protects the harness and electrical components in case of overcurrent. There are 10A
(accessory) and 20A (charge) fuses, and a separate 20A fuse is included as a spare. If the
fuse blows, remove the cause and replace it with a spare fuse. also, use the spare fuse only
for emergencies and immediately replace it with a regular A (ampere) fuse.
⑯Pilot lamp (Green)
Illuminates when the engine switch is in the "RUN" position.
⑰Hour meter
The approximate usage time is measured and displayed. Use it as a guide for maintenance
time.
2.3 Direction of definition
The front, back, left, and right of this machine are expressed as seen from the operator
sitting on the seat as shown below.
as seen from the operator.
Backward/reverse
righ
t
"Forward" and "Reverse" in the text are also expressed
- 17 -
２. 各部の名称とはたらき
left
Forward/forward
Advertisement
Table of Contents
