Table of Contents
Advertisement
The warranty does not cover failures or accidents caused by using non -genuine products.
3) If the Blade hits the root of a curbstone or tree during the work and is impacted, the
work is immediately stopped, and the Blade and Blade stay are checked for bends,
defects, and wear, and if necessary, please replace them.
sure that the parts to be repaired during the previous work have been properly
adjusted.
4) If the Blade and Blade stay are wearing, cracks, bends, defects, etc., the Blade suddenly
breaks and fly out during work, resulting in serious injury or injury to the worker or
others nearby.
5) The Blade stay will be consumed as well as the Blade. Even if you do not see any bending
or wear, replace it every 100 hours or every 2 years, whichever comes first.
6) Blade rotates at high speed. If the Blade is chipped or broken even a little, it will cause
vibration. Not only is it dangerous to continue working while vibrating, but it can also
cause cracks and cracks in various parts of the product, significantly shortening the life
of the product.
7) Replacing the Blade stay requires special tools and maintenance skills. For replacing work,
please ask your dealer.
replaced.
8) When replacing the Front and Back of the blade, be sure to replace the Bla de setting bolt
when replacing the blade, and at the same time replace the other parts including the
Blade set bolt (hard lock nut, nut guard, knife collar) at the same time, never substitute
other bolts and nuts.
9) Replace two blades at the same time. Replacing only one side and mixing old and new
blades may cause abnormal vibration.
1) Blade replacement work must be done by a person with suitable tools and maintenance
skills.
2) The cap nut will also wear. When polishing up the Blade, also replace the cap nut at the
same time and never substitute another nut.
At the same time, the cap nut and Blade stay set bolt must be
- 49 -
5. 点検・整備・調整
Before starting work, make
Advertisement
Table of Contents
